Our biomass pyrolysis plant with newly microwave technology can get products:biomass charcoal or called biomass coal,biomass oil which can get biomass fuel for the further process,biomass liquid-biomass vinegar,biomass gas which can be as gas energy.

For example ,if the raw material is bamboo,you can get bamboo charcoal(At present the bamboo charcoal is mainly used in air purification, healthcare, fuel, food and water quality and other aspects),bamboo oil,bamboo vinegar,and bamboo gas.

Flow Diagram for Biomass Microwave Pyrolysis Equipment

System composition of Biomass Pyrolysis Equipment:
This system is composed of raw material transport system,microwave bamboo boiler heated by 20 sets of microwave generator which power is 20 KW and the total power is 400 KW,biomass oil & liquid & gas separation and collecting system.

Features :
1.Large Production
Compared to traditional method of producing bamboo-charcoal, microwave production method has the characteristic of large production.
Traditional kiln only produces over 300 KGS bamboo-charcoal per time, however, microwave oven can reach 4 tons each time,and 2.5 hours for one time.

2. Efficiency can be increased more than 70%
In order to heat object, microwave penetrates it from all directions and this process does not require thermal conduction. With the features of rapid and uniform heating and temperature gradient control, microwave heating could effectively control generate type and amount of pyrolysis products and greatly reduce heating time, so its thermal efficiency is very high and compared with common heating its efficiency can be increased more than 70%.

3.  Suitable for  large-scale industrial production
Compared with traditional way of preparing charcoal which needs more than 70 hours, the microwave carbonization time that needs only 4 hours is sharply reduced. So the latter will be more suitable for the need of large-scale industrial production.

4. Products are easy to collect
Charcoal, vinegar, bamboo tar and combustible gas generated in the process are easy to collect.

5.Can achieve automated continuous production
Producing charcoal by microwave can reduce labor intensity and production personnel and also achieve automated continuous production.

6.Reduce the demand of fuel,save enery
In addition, charcoal preparation by microwave could reduce the demand of fuel such as wood which are much consumed in traditional kiln preparation. This will help save forest resources and protect ecological environment.

7.It is favorable to economic cycle.

The basic parameters:
Input power: three-phase 380V±5% 50Hz±1%
Ambient temperature: 0—35 ℃
Relative humidity: ≤85%
Work area: no inflammable, explosive or corrosive gases.
Microwave power: 400KW
Microwave frequency:915MHz±10MHz
Processing capacity: 4 tons per furnace, 2.5 h/ furnace
Cooling system: water cooling + air cooling
Microwave leakage: ≤1mW/CM2

Have any question, Please enter the form below and click the submit button.

2 + 8 = ? Please enter the answer to the sum & Click Submit to verify your registration.